LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> B3000 Base, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Camshaft Position (CMP) Sensor Removal / Installation - 4.0L >> Removal and Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal and Installation

Fig 1: Identifying Camshaft Position (CMP) Sensor, Connector And Bolt
G04930169Courtesy of MAZDA MOTORS CORP.
  1. Remove the camshaft position (CMP) sensor.
    1. Disconnect the electrical connector.
    2. Remove the bolt
    3. Remove the sensor.
    Fig 2: Camshaft Position Sensor Bolt With Torque Specification
    G04930170Courtesy of MAZDA MOTORS CORP.
  2. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals