LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> B3000 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (Antilock Brake System) >> Abs/TCS HU/Cm Inspection >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Abs/TCS HU/Cm Inspection: Notes

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Connect the SST  between the ABS/TCS HU/CM and harness connector with the ignition switch off.
  3. Attach the tester leads to the SST  and inspect voltage referring to the table below.
    Fig 1: Connecting Special Service Tool Between ABS/TCS HU/CM & Harness Connector
    G01026708Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals