Front Fog Light Switch Inspection

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Remove the light switch. (See LIGHT SWITCH REMOVAL/INSTALLATION .)
Inspect for continuity between the light switch terminals using an ohmmeter.
- If not as specified, replace the light switch.

Fig 1: Front Fog Light Switch Terminals Continuity Table

Courtesy of MAZDA MOTORS CORP.

Fig 2: Identifying Front Fog Light Switch Terminals Connection

Courtesy of MAZDA MOTORS CORP.