LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> B3000 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 284 (Control System (HVAC)) >> Refrigerant Pressure Switch Removal/Installation >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Refrigerant Pressure Switch Removal/Installation: Notes

WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery.
  2. Discharge the refrigerant from the system. (See REFRIGERANT CHARGING .)
  3. Remove the front combination light (RH). (See FRONT COMBINATION LIGHT REMOVAL/INSTALLATION .)
  4. Loosen the refrigerant pressure switch using two spanners.
  5. Remove in the order indicated in the table.
    REFRIGERANT PRESSURE SWITCH REMOVAL/INSTALLATION

    G01931803
    1 Refrigerant Pressure Switch Connector
    2 Refrigerant Pressure Switch (See REFRIGERANT PRESSURE SWITCH INSTALLATION NOTE  .)
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals