Removal and Installation

WARNING: This page is about a different car, the 2003 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the battery negative cable.

Fig 1: Disconnecting Electrical Connectors
Courtesy of MAZDA MOTORS CORP.
Disconnect the electrical connectors.
Raise and support the vehicle.

Fig 2: Removing Screws And Control Module
Courtesy of MAZDA MOTORS CORP.
Remove the screws and the control module.
NOTE:
- The 4x2 and 4x4 modules are not interchangeable. Before installing a module, verify its application.
To install, reverse the removal procedure.