April 5, 2026: LEMON Manuals is launched! Read the announcement.

Bleeder Screw Assembly Note

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Assemble the bleeder screw to the caliper using the SST.
Tightening torque

6.9-9.8 N.m {71-99 kgf.cm, 62-86 in.lbf}

Fig 1: Installing Bleeder Screw To Caliper
Courtesy of MAZDA MOTORS CORP.