Back-Up Light Switch Inspection

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the back-up light switch connector.
Verify that the continuity between the back-up light switch terminals is as indicated in the table.
- If not as indicated in the table, replace the back-up light switch.
Fig 1: Terminal And Continuity Chart
Courtesy of MAZDA MOTORS CORP.

Fig 2: Checking Continuity Between Back-Up Light Switch Terminals
Courtesy of MAZDA MOTORS CORP.