LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> CX-7 Sport, AWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Control System (L3 With TC) >> Crankshaft Position (CKP) Sensor Removal/Installation >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Crankshaft Position (CKP) Sensor Removal/Installation: Removal

  1. Disconnect the negative battery cable.
  2. Remove the charge air cooler duct. (See INTAKE AIR SYSTEM REMOVAL/INSTALLATION ).
  3. Remove the under cover.
  4. Remove the splash shield (RH).
  5. Disconnect the CKP sensor connector.
  6. Remove the installation bolts to remove the CKP sensor.
scientia non olet · About LEMON Manuals