NO. 1 Engine Mount Installation Note
- Install the NO. 1 engine mount bracket on the automatic transaxle case and temporarily tighten bolt A and B.
- Install the NO. 1 engine mount rubber on the bracket and temporarily tighten bolt C.
- Fully tighten bolt A and B in order of A→B.
Tightening torque
Bolt A. B: 93.1-116.6 N.m
{9.50-11.88 kgf.m, 68.7-85.9 ft.lbf}
Bolt C: 85.3-116.6 N.m
{87.0-11.88 kgf.m, 62.9-85.9 ft.lbf}
- Fully tighten the bolt C.