LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> CX-9 Touring, 3.5 C, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System/Roll Stability Control System >> DSC/RSC HU/Cm Inspection >> Standard (Reference Value)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Standard (Reference Value)

Fig 1: Identifying DSC/RSC HU/CM Connector Terminal
G04970215Courtesy of MAZDA MOTORS CORP.
CONNECTOR TERMINAL REFERENCE

Terminal Signal name Connected to Measured item Measured terminal (measured condition) Standard Inspection item(s)
A Ground (DSC/RSC system) Ground point Continuity A-ground point Continuity detected
  • Wiring harness (A-ground point)
B Ground (ABS motor) Ground point Continuity B-ground point Continuity detected
  • Wiring harness (B-ground point)
C - - - - - -
D - - - - - -
E - - - - - -
F LR wheel-speed sensor (power supply) LR ABS wheel-speed sensor Continuity F-LR ABS wheel-speed sensor connector terminal B Continuity detected
  • Wiring harness (F-LR ABS wheel-speed sensor connector terminal B)
G RR wheel-speed sensor (power supply) RR ABS wheel-speed sensor Continuity G-RR ABS wheel-speed sensor connector terminal B Continuity detected
  • Wiring harness (G-RR ABS wheel-speed sensor connector terminal B)
H - - - - - -
I LR wheel-speed sensor (signal) LR ABS wheel-speed sensor Continuity I-LR ABS wheel-speed sensor connector terminal A Continuity detected
  • Wiring harness (I-LR ABS wheel-speed sensor connector terminal A)
J RR wheel-speed sensor (signal) RR ABS wheel-speed sensor Continuity J-RR ABS wheel-speed sensor connector terminal A Continuity detected
  • Wiring harness (J-RR ABS wheel-speed sensor connector terminal A)
K - - - - - -
L - - - - - -
M CAN2_L - Inspect under DTC inspection -
N - - - - - -
O - - - - - -
P CAN2_H - Inspect under DTC inspection -
Q - - - - - -
R - - - - - -
S - - - - - -
T - - - - - -
U TCS OFF switch TCS OFF switch Continuity U-TCS OFF switch connector terminal A Continuity detected
  • Wiring harness (U-TCS OFF switch connector terminal A)
V HS_CAN_L - Inspect under DTC inspection -
W - - - - - -
X Power supply (system) Ignition switch Voltage Ignition switch at ON B+
  • Wiring harness (X- ignition switch)
Ignition switch is off. 1 V or less -
Y HS_CAN_H - Inspect under DTC inspection -
Z - - - - - -
AA - - - - - -
AB RF wheel-speed sensor (signal) RF ABS wheel-speed sensor Continuity AB-RF ABS wheel-speed sensor connector terminal B Continuity detected
  • Wiring harness (AB-RF ABS wheel-speed sensor connector terminal B)
AC - - - - - -
AD LF wheel-speed sensor (signal) LF ABS wheel-speed sensor Continuity AD-LF ABS wheel-speed sensor connector terminal B Continuity detected
  • Wiring harness (AD-LF ABS wheel-speed sensor connector terminal B)
AE RF wheel-speed sensor (power supply) RF ABS wheel-speed sensor Continuity AE-RF ABS wheel-speed sensor connector terminal A Continuity detected
  • Wiring harness (AE- RF ABS wheel-speed sensor connector terminal A)
AF - - - - - -
AG LF wheel-speed sensor (power supply) LF ABS wheel-speed sensor Continuity AG-LF ABS wheel-speed sensor connector terminal A Continuity detected
  • Wiring harness (AG-LF ABS wheel-speed sensor connector terminal A)
AH - - - - - -
Al - - - - - -
AJ - - - - - -
AK Power supply (ABS motor operation) Battery Voltage Under any condition B+
  • Wiring harness (AK- battery)
AL Power supply (solenoid operation) Battery Voltage Under any condition B+
  • Wiring harness (AL- battery)
scientia non olet · About LEMON Manuals