LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2008 >> 6 i Touring, 4D Hatchback, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (L3) >> Pcm Configuration [L3]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pcm Configuration [L3]

  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
    • When using the IDS (laptop PC)
      1. Select the "Module Programming".
    • When using the PDS (Pocket PC)
      1. Select "Programming".
      2. Select "Module Programming".
  3. Then, select the "Programmable Module Installation", "PCM" from the screen menu.
  4. Select "PCM" and perform procedures according to directions on the M-MDS screen.
  5. Retrieve DTCs by the M-MDS, then verify that there is no DTC present.
    • If a DTC is present, perform the applicable DTC inspection.
      • Fig 1: Locating DLC-2 Connector
      G04324072Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals