Powertrain Control Module (Pcm) - 3.0L (4V) Removal/Installation: Removal
- Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation procedure. See PROGRAMMABLE MODULE INSTALLATION
.
NOTE:
- Any PCM replacement will require that ALL customer keys are available to be programmed at the time of installation. PCM replacement DOES NOT require new keys.
- Remove the 2 PCM stud bolt nuts and position the wiring harness and the manifold absolute pressure sensor aside.
- Disconnect the 3 PCM electrical connectors.
- Remove the 2 stud bolts and the PCM.