LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2009 >> 5 Sport, 2.3 3, Standard >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Front Power Window Regulator Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Power Window Regulator Removal/Installation

  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L3] .)
  2. Disconnect the negative battery cable.
  3. Remove the following parts:
    1. Inner garnish (See INNER GARNISH REMOVAL/INSTALLATION .)
    2. Front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
    3. Front door glass (See FRONT DOOR GLASS REMOVAL/INSTALLATION .)
    4. Power window motor (See POWER WINDOW MOTOR REMOVAL/INSTALLATION .)
  4. Remove the nut.
    Fig 1: View Of Front Power Window Regulator Nut With Torque Specifications
    G05545664Courtesy of MAZDA MOTORS CORP.
  5. Insert a hand through the service hole, rotate the drum housing in the direction shown in the figure to detach the tabs from the front door unit.
    Fig 2: Inserting Hand Through Service Hole
    G05545665Courtesy of MAZDA MOTORS CORP.
  6. Remove the front power window regulator through the service hole.
  7. Install in the reverse order of removal.
    CAUTION:
    • Make sure the cable does not unspool from the drum housing when installing.
      Fig 3: View Of Front Power Window Regulator
      G05545666Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals