April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC P2229 [L3]: Notes

DTC P2229 (L3) DETECTION CONDITION & POSSIBLE CAUSES

DTC P2229

BARO sensor circuit high input

DETECTION CONDITION

PCM monitors input voltage from BARO sensor. If input voltage is above 4.45 V for 5s , PCM determines that BARO sensor circuit has malfunction.

Diagnostic support note

This is a continuous monitor (CCM).
MIL illuminates if PCM detects the above malfunction condition during the first drive cycle.
FREEZE FRAME DATA is available.
DTC is stored in PCM memory.

POSSIBLE CAUSE

BARO sensor malfunction
PCM malfunction