LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2009 >> 6 i SV, 2.5 H >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (L5) >> Manifold Absolute Pressure (Map) Sensor Removal/Installation [L5]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Manifold Absolute Pressure (Map) Sensor Removal/Installation [L5]

  1. Disconnect the negative battery cable.
  2. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION [L5] .)
  3. Disconnect the MAP sensor connector.
  4. Remove the MAP sensor.
  5. Install in the reverse order of removal.
    Fig 1: MAP Sensor Connector & Intake Manifold With Torque Specifications
    G06205243Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals