PID/Data Monitor Inspection [Advanced Keyless And Start System]

DTC INSPECTION [ADVANCED KEYLESS AND START SYSTEM]

PID/Data Monitor and Record Procedure

1. Connect the M-MDS to the DLC-2.






2. Access and monitor PIDs using the M-MDS.

3. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

- When using the IDS (laptop PC)

1 Select "DataLogger".
2 Select "Modules".
3 Select "RKE".

- When using the PDS (Pocket PC)

1 Select "Module Tests".
2 Select "RKE".
3 Select "DataLogger".

4. Select the applicable PID from the PID table.

PID/data monitor table

PID/Data Monitor Table:

Active command mode table

Active Command Mode Table: