LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2009 >> CX-7 Sport, 2.3 L, AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Front Power Window Regulator Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Power Window Regulator Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the following parts:
    1. Inner garnish (See INNER GARNISH REMOVAL/INSTALLATION ).
    2. Front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION ).
    3. Front door speaker. (See FRONT DOOR SPEAKER REMOVAL/INSTALLATION ).
    4. Front door glass (See FRONT DOOR GLASS REMOVAL/INSTALLATION .)
    5. Power window motor (See POWER WINDOW MOTOR REMOVAL/INSTALLATION .)
    6. Front beltline molding (See FRONT BELTLINE MOLDING REMOVAL/INSTALLATION ).
  3. Remove the nuts.
    Fig 1: Front Power Window Regulator Nuts With Torque Specifications
    G04861002Courtesy of MAZDA MOTORS CORP.
  4. Insert a hand through the speaker installation hole, rotate the drum housing in the direction shown in the figure to detach the tabs from the front door unit.
    Fig 2: Identifying Drum Housing
    G04861003Courtesy of MAZDA MOTORS CORP.
  5. Remove the front power window regulator as shown in the figure.
    6. Fig 3: Identifying Front Power Window Regulator
    G04861004Courtesy of MAZDA MOTORS CORP.
  6. Install in the reverse order of removal.
    CAUTION:
    • Make sure the cable does not unspool from the drum housing when installing.
scientia non olet · About LEMON Manuals