Two-step Down Function Inspection

Before inspecting the two-step down function, make sure that the two-step down function is turned on (if the two-step down function is turned off, the power window close not stop once.)
The distance the door glass opens can be changed using the two-step down function (approx. 20-100 mm {0.79-3.93 in} ).
The two-step down function can be made inoperative. (The function is operative at the initial setting.)
The two-step down function does not function during IG OFF timer.
NOTE:
- Perform the following inspection for the power window main switch and the power window subswitches for each front window.

STEP	INSPECTION		ACTION
1	Turn the ignition switch to the ON position. Turn on the two-step down function if it is turned off. Raise driver's and passenger's side front door glass completely. When the driver's and passenger's side front door glass is lowered using manual mode, does it move down to approx. 30 mm {1.2 in} from the completely closed position and stop for 1 s ? (This inspection cannot be performed during IG OFF timer function operation.)	Yes	Two-step down function is normal. Reinspect malfunction symptoms.
1		No	Perform the power window initial setting procedure and verify auto-up/down operation. (See POWER WINDOW INITIALIZATION PROCEDURE ). If the automatic function does not operate, go to AUTOMATIC DOOR GLASS RETURN FUNCTION INSPECTION . If the automatic function operates but the two-step down function does not, replace the power window switch.