LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2009 >> CX-9 Touring, 3.7 A, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Control System [Body Control Module) >> Body Control Module (BCM) Removal/Installation >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Body Control Module (BCM) Removal/Installation: Notes

  1. Disconnect the negative battery cable.
  2. Remove the front scuff plate inner (LH). See FRONT SCUFF PLATE REMOVAL/INSTALLATION .
  3. Remove the front side trim (LH). See FRONT SIDE TRIM REMOVAL/INSTALLATION .
  4. Remove the dashboard under cover. (Driver Side). See DASHBOARD UNDER COVER REMOVAL/INSTALLATION .
  5. Set the hood release lever out of the way. See HOOD LATCH AND RELEASE LEVER REMOVAL/INSTALLATION .
  6. Remove in the order indicated in the table.
    Fig 1: Body Control Module Replacement Components With Torque Specifications
    G05509975Courtesy of MAZDA MOTORS CORP.
  7. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals