LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2009 >> CX-9 Touring, 3.7 A, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System/Roll Stability Control System >> DSC/RSC System Inspection >> Preparation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DSC/RSC System Inspection: Preparation

  1. Verify that battery is fully charged.
  2. Turn the ignition switch to the ON position, and verify that the ABS warning light goes out after approx. 3 s.
  3. Turn the ignition switch off.
  4. Jack up the vehicle and support it evenly on safety stands.
  5. Shift to the N position.
  6. Verify that all four wheels rotate.
  7. Rotate the inspected wheels by hand, and verify there is no brake drag.
    • If there is any brake drag, perform regular brake inspection.
    • If there is no brake drag, perform DSC/RSC HU/CM operation inspection.
scientia non olet · About LEMON Manuals