LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2010 >> 5 Grand Touring, 2.3 L >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Power Window Main Switch Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Power Window Main Switch Removal/Installation

  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L3] .)
  2. Disconnect the negative battery cable.
  3. Remove the cover, then remove the screw.
  4. Detach clips B using a tape-wrapped Flathead screwdriver.
  5. Detach tab A by pulling it in the direction of the arrow in illustration, and remove the switch panel from the front door trim.
  6. Disconnect the power window main switch connector and the power outer mirror switch connector.
    Fig 1: Detaching Clips
    G05545672Courtesy of MAZDA MOTORS CORP.
  7. Remove the screws, then remove the power window main switch.
  8. Install in the reverse order of removal.
    Fig 2: Removing Power Window Main Switch
    G05545673Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals