LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2010 >> 5 Sport, 2.3 L, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System [L3] >> Intake Air Temperature (IAT) Sensor Inspection >> Resistance Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Resistance Inspection

  1. Disconnect the mass air flow sensor connector.
  2. Verify that the resistance between MAF sensor terminals D and E is within the specification.
    • If the monitor item status/specification (reference) is not within the specification, even though the IAT sensor resistance is within the specification, perform the "Circuit Open/Short Inspection".
    • If not within the specification, replace the MAF sensor.

    Standard 

    RESISTANCE SPECIFICATION

    Ambient temperature (°C {°F}) Resistance (kilohm)
    -20 {-4.0} -13.6-18.4
    20 {68} 2.21-2.69
    60 {140} 0.493-0.667
    Fig 1: Identifying Intake Air Temperature Sensor Connector Terminals
    G05543227Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals