| 2 |
PERFORM PARAMETER RESET
- Connect the M-MDS to the DLC-2.
(See
M-MDS CONNECTING PROCEDURE .)
- Insert a valid key into the key slot and depress the clutch pedal. Or, bring the valid advanced key into the vehicle and depress the clutch pedal.
- After verifying that the keyless indicator light (green) has illuminated, release the clutch within approx. 5 s and switch the ignition from off→ACC→ON.
NOTE:
- Although the security light remains illuminated and DTC 23 is displayed after approx. 1 min
, continue to perform the procedure as indicated.
- After vehicle identification, select the following from the M-MDS initial screen.
- Using an IDS (laptop PC):
- Select "Body"
- Select "Security"
- Select "PATS Functions"
- Using a PDS (Pocket PC).
- Select "All Tests and Calibrations"
- Select "PATS Functions"
- Then, select an item from the screen menu
Item
- Perform the security access according to the directions on the M-MDS screen.
- Select the replaced parts "PCM" according to the directions on the M-MDS screen.
CAUTION:
- At this time, do not select the other parts from the M-MDS menu.
- After verifying that the PATS function menu is displayed again on the M-MDS screen, select "Finish (this menu)"
- Switch the ignition off.
- Switch the ignition on.
- Verify that the security light illuminates for approx. 3 s
, and then turns off.
- Switch the ignition off.
|
Go to the next step. |