LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2010 >> 6 s Touring Plus >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Seat System >> Position Memory Control Module Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Position Memory Control Module Removal/Installation

WARNING:
  • Handling a front seat (with built-in side air bag) improperly can accidentally operate (deploy) the air bag, which may seriously injure you. Read the service warnings before handling a front seat (with built-in side air bag). See AIR BAG SYSTEM SERVICE WARNINGS .
  1. Operate the power seat switch and move the seat cushion forward and upward.
  2. Disconnect the negative battery cable and wait 1 min or more. 
  3. Remove the driver-side front seat. See FRONT SEAT REMOVAL/INSTALLATION .
  4. Remove in the order indicated in the table.
    Fig 1: Identifying Memory Control Module, Screw And Connector
    G06200845Courtesy of MAZDA MOTORS CORP.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals