LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2010 >> CX-9 Touring, 3.7 A, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 593 (Control System [Body Control Module)) >> Body Control Module (BCM) Removal/Installation >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Body Control Module (BCM) Removal/Installation: Notes

WARNING: This page is about a different car, the 2009 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the front scuff plate inner (LH). See FRONT SCUFF PLATE REMOVAL/INSTALLATION .
  3. Remove the front side trim (LH). See FRONT SIDE TRIM REMOVAL/INSTALLATION .
  4. Remove the dashboard under cover. (Driver Side). See DASHBOARD UNDER COVER REMOVAL/INSTALLATION .
  5. Set the hood release lever out of the way. See HOOD LATCH AND RELEASE LEVER REMOVAL/INSTALLATION .
  6. Remove in the order indicated in the table.
    Fig 1: Body Control Module Replacement Components With Torque Specifications
    G05509975Courtesy of MAZDA MOTORS CORP.
  7. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals