Smart Junction Box (SJB)
SMART JUNCTION BOX (SJB) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| B106E | Solid State Driver Disabled Due to Short Circuit | See PINPOINT TEST 1: DTCs B106E/B106F - SOLID STATE DRIVER DISABLED/MODULE DISABLED . |
| B106F | Module Disabled Due to External Fault | See PINPOINT TEST 1: DTCs B106E/B106F - SOLID STATE DRIVER DISABLED/MODULE DISABLED . |
| B1317 | Battery Voltage High | See PINPOINT TEST 2: DTC B1317 . |
| B1318 | Battery Voltage Low | See PINPOINT TEST 3: DTC B1318 . |
| B1342 | ECU Is Faulted | See PINPOINT TEST 1: DTCs B106E/B106F - SOLID STATE DRIVER DISABLED/MODULE DISABLED . |
| P062F | Internal Control Module EEPROM Error | INSTALL a new SJB. See SMART JUNCTION BOX (SJB) REMOVAL/INSTALLATION . TEST the system for normal operation. |
| U0155 | Lost Communication With Instrument Panel Cluster (IC) Control Module | See PINPOINT TEST 3: DTC U0155 . |
| U2472 | Unexpected Ignition State | This DTC is only set when an on-demand self-test is run with the test entry conditions not correct. CLEAR the DTC. REPEAT the self-test with the ignition in the ON position and the vehicle stationary. |
| U2473 | Unexpected Vehicle Speed (VSS) | This DTC is only set when an on-demand self-test is run with the test entry conditions not correct. CLEAR the DTC. REPEAT the self-test with the ignition in the ON position and the vehicle stationary. |
| All other DTCs | - | See DIAGNOSTIC TROUBLE CODE (DTC) CHART - B, C AND U CODES . TEST the system for normal operation. |