Manifold Absolute Pressure (Map) Sensor/Boost Air Temperature Sensor Removal/Installation
WARNING: This page is about a different car, the 2010 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L3 WITH TC] .)
- Disconnect the negative battery cable.
- Remove the oil level gauge pipe. (See OIL PAN REMOVAL/INSTALLATION .)
- Disconnect the MAP/boost air temperature sensor connector.
- Remove the MAP/boost air temperature sensor.
- Install in the reverse order of removal.