LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2011 >> 3 i Touring, 2.0 F, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System [LF, L5] >> Manifold Absolute Pressure (Map) Sensor Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Manifold Absolute Pressure (Map) Sensor Removal/Installation

  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [LF, L5] ).
  2. Disconnect the negative battery cable.
  3. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION ).
  4. Disconnect the MAP sensor connector.
  5. Remove the MAP sensor.
  6. Install in the reverse order of removal.
    Fig 1: MAP Sensor And Intake Manifold With Torque Specifications
    G07868523Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals