NOT P Position Switch Inspection
CAUTION:
- Water or foreign objects entering the connector can cause a poor connection or corrosion. Be sure not to drop water or foreign objects on the connector when disconnecting it.
- Disconnect the selector lever component connector.
- Disconnect the negative battery cable.
- Remove the rear console. (See REAR CONSOLE REMOVAL/INSTALLATION .)
- Disconnect the selector lever component connector.
- Measure the continuity between selector lever component terminals G and K.
- If there is any malfunction, replace the selector lever component. (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION .)
SWITCH SPECIFICATION CHART
| Test condition | Continuity |
|---|---|
| P position | No continuity |
| Except P position | Continuity |