DTC B10C6:1F [Advanced Keyless Entry And Push Button Start System]: Notes
DTC DETECTION CONDITION AND POSSIBLE CAUSES
| DETECTION CONDITION |
Cannot receive signal correctly from keyless antenna (exterior, rear) |
| POSSIBLE CAUSE |
- Connector or terminal malfunction
- Short to ground in the wiring harness between keyless antenna (exterior, rear) terminal C and keyless control module terminal 3C
- Short to ground in the wiring harness between keyless antenna (exterior, rear) terminal D and keyless control module terminal 3AC
- Short to power supply in the wiring harness between keyless antenna (exterior, rear) terminal C and keyless control module terminal 3C
- Short to power supply in the wiring harness between keyless antenna (exterior, rear) terminal D and keyless control module terminal 3AC
- Open circuit in the wiring harness between keyless antenna (exterior, rear) terminal C and keyless control module terminal 3C
- Open circuit in the wiring harness between keyless antenna (exterior, rear) terminal D and keyless control module terminal 3AC
- Keyless antenna (exterior, rear) malfunction
- Keyless control module malfunction
|
|
|