DTC P081C:62 [Advanced Keyless Entry And Push Button Start System]: Notes

DTC DETECTION CONDITION AND POSSIBLE CAUSES

DETECTION CONDITION	CAN and P range switch signals do not correspond, while ignition switch is ON
POSSIBLE CAUSE	Connector or terminal malfunction Short to ground in the wiring harness between selector lever component terminal G and keyless control module terminal 3M Short to power supply in the wiring harness between selector lever component terminal G and keyless control module terminal 3M Selector lever component malfunction Open circuit in the wiring harness between selector lever component terminal G and keyless control module terminal 3M Keyless control module malfunction