| B10D5:13 |
|
- Coil antenna malfunction
- PCM determined a malfunction in coil antenna even though it is normal
|
(See
SECURITY LIGHT: 12, DTC: B10D5:13/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)]
.) |
| B10D7:05 |
|
Key ID number program error |
(See
SECURITY LIGHT: 13, DTC: B10D7:05/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)]
.) |
| B10D7:51 |
|
Keyless control module has detected unprogrammed key ID number |
(See
SECURITY LIGHT: 15, DTC: B10D7:51/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)]
.) |
| B10D7:81 |
|
Keyless control module cannot read key ID number data normally |
(See
SECURITY LIGHT: 14, DTC: B10D7:81/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)]
.) |
| B10D7:94 |
|
Key ID number data cannot be read |
(See
SECURITY LIGHT: 13, DTC: B10D7:94/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)]
.) |
| B10D8:00 |
|
Only one key or no key ID number programmed |
(See
SECURITY LIGHT: 21, DTC: B10D8:00/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)]
.) |
| B10D9:87 |
|
No detected communication with coil antenna |
(See
SECURITY LIGHT: 11, DTC: B10D9:87/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)]
.) |
| B10DA:51 |
|
Communication error between keyless control module and PCM (data transfer error) |
(See
SECURITY LIGHT: 22, DTC: B10DA:51/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)]
.) |
| B10DA:62 |
|
ID number data between keyless control module and PCM and different |
(See
SECURITY LIGHT: 23, DTC: B10DA:62/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)]
.) |
| B10E6:11 |
Not illuminated |
Voltage less than threshold (2.2-6.5 V
) is detected for 0.5 s
while coil antenna power supply circuit is active |
(See
SECURITY LIGHT: NOT ILLUMINATED, DTC B10E6:11/- [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)]
.) |
| B10E6:12 |
Voltage higher than threshold (2.2-6.5 V
) is detected for 0.05 s
while coil antenna power supply circuit is not active |
(See
SECURITY LIGHT: NOT ILLUMINATED, DTC B10E6:12/-[IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)]
.) |
| U0100:87 |
|
Communication error between keyless control module and PCM (no response/condition mismatch) |
(See
SECURITY LIGHT: 16, DTC: U0100:87/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)]
.) |