Key Reminder Switch Inspection [Without Advanced Keyless Entry And Push Button Start System]

1. Disconnect the negative battery cable.
2. Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION .)
3. Disconnect the key reminder switch connector.
   Fig 1: Key Reminder Switch Connector

   Courtesy of MAZDA MOTORS CORP.
4. Verify that the continuity between the key reminder switch terminals is as indicated in the table.

• If not as indicated in the table, replace the key reminder switch.

Fig 2: Key Reminder Switch Terminal Continuity Chart

Courtesy of MAZDA MOTORS CORP.

Fig 3: Key Reminder Switch Connector Terminals

Courtesy of MAZDA MOTORS CORP.