LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Control System [MZR 2.5]) >> Manifold Absolute Pressure (Map) Sensor Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Manifold Absolute Pressure (Map) Sensor Removal/Installation

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION .)
  2. Remote the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION .)
  3. Disconnect the MAP sensor connector.
  4. Remove the MAP sensor.
  5. Install in the reverse order of removal.
Fig 1: Map Sensor Bolt With Torque Specifications
G07620725Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals