LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2011 >> CX-7 i SV, 2.5 5 >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Control System (Body Control Module) >> Control System Personalization Features Setting Procedure >> Using M-MDS
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using M-MDS

NOTE:
  • Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the PERSONALIZATION FEATURES SETTING PROCEDURE.
  1. Connect the M-MDS to DLC-2.
  2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
    • When using the IDS (laptop PC)
      1. Select the "Module Programming".
  3. Then, select items from the screen menu in the following order.
    1. Select "Programmable Parameters".
    2. Select "Personality", "Interior lighting", "Washer/Wiper", "Security" or "Power Door Locks".
  4. Select an item name, and then select option.
    Fig 1: Locating Data Link Connector (DLC-2)
    G06732682Courtesy of MAZDA MOTORS CORP.

Items of "Personality" 

CONTROL UNIT CHART

M-MDS display Function Initial setting Setting content Control unit
Smart turn The "turn light system" function can be set. Disabled Disabled/Enabled BCM
Auto relock timer (without SKE) Auto re-lock operation timing can be changed. 30sec 30sec/60sec/90sec/Disabled BCM
2 stage door unlocking (without SKE) 2-step unlocking system can be set. Enabled Disabled/Enabled BCM
Answer feed back (hazard) Answer back hazard can be set to inoperable. Enabled Enabled/Disabled BCM
Answer feed back (horn) Answer back horn can be set to inoperable. Enabled Enabled/Disabled BCM
Room lamp timer (When Doors closed) The elapsed time between the doors closing and the interior light turning off can be adjusted. 15s 7.5s/15s/30s/60s BCM
Room lamp timer (When Doors unlocked) The elapsed time between the doors unlocking and the interior light turning off can be adjusted. 30s 7.5s/15s/30s/60s BCM
Window opening with Advanced-key/Transmitter Exterior open function can be set. Enabled Disabled/Enabled BCM
Window closing/opening with Request switch Exterior open/close function can be set. Enabled Disabled/Enabled BCM

Items of "Interior lighting" 

INTERIOR LIGHTING REFERENCE

M-MDS display Function Initial setting Setting content Control unit
Auto room lamp (when IG-OFF) The automatic illumination function of the interior light after the ignition is switched off can be canceled. Enabled Enabled/Disabled BCM
Room Lamp Battery Saver Timer The elapsed time for the interior light to automatically turn off when a door is ajar can be adjusted. 30min 30min/60min/10min BCM
Room Lamp Battery Saver The automatic illumination function of the interior light to automatically turn off can be canceled. Enabled Enabled/Disabled BCM

Items of "Washer/Wiper" 

WASHER/WIPER REFERENCE

M-MDS display Function Initial setting Setting content Control unit
Rear wiper interlocked to window washer switch The wiper action in conjunction with the rear washer operation can be canceled. Enabled Enabled/Disabled BCM

Items of "Security" 

SECURITY CHART

M-MDS display Function Initial setting Setting content Control unit
Burglar alarm start up method Theft-deterrent system start up; method can be changed. Transmitter and key Transmitter and key/Transmitter BCM

Items of "Power Door Locks" 

Applied VIN (assumed): 

FUNCTION CHART

M-MDS display Function Initial setting Setting content Control unit
Auto door lock (When vehicle start) Auto lock function can be set. Enabled Disabled/Enabled BCM
Auto door lock (When changed gear-selector) Auto lock/unlock function can be changed. Disabled Disabled, All doors lock/unlock, All doors lock/Driver-side door unlock, All doors lock BCM
Auto door lock (When IG-Off) Auto unlock function can be set. All doors unlock Disabled/All doors unlock/Driver-side door unlock BCM
scientia non olet · About LEMON Manuals