Engine Coolant Temperature (ECT) Sensor Inspection
- Disconnect the negative battery cable.
- Drain the engine coolant. (See ENGINE COOLANT REPLACEMENT .)
- Disconnect the ECT sensor connector.
- Remove the ECT sensor. (See ENGINE COOLANT TEMPERATURE (ECT) SENSOR REMOVAL/INSTALLATION .)
- Place the ECT sensor in water with a thermometer, and heat the water gradually.
- Measure the resistance between the ECT sensor terminals A and B using an ohmmeter.
- If not as specified, replace the ECT sensor. (See ENGINE COOLANT TEMPERATURE (ECT) SENSOR REMOVAL/INSTALLATION .)
ECT sensor Specification
ECT RESISTANCE CHART
| ECT (°C {°F}) | Resistance (kilohms) |
|---|---|
| 20{68} | Approx. 37.3 |
| 80{176} | Approx. 3.84 |