LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2011 >> CX-7 i SV, 2.5 5 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System [L5] >> Knock Sensor (KS) Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Knock Sensor (KS) Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION .)
  3. Remove the intake manifold. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION .)
  4. Disconnect the KS connector.
  5. Remove the KS.
  6. Install in the reverse order of removal.
    Fig 1: Locating KS Connector And Bolt With Torque Specifications
    G06205261Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals