LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2011 >> CX-9 Sport, 3.7 A, AWD >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic - Engine Control System (Introduction) >> After Repair Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

After Repair Procedure

  1. Connect the M-MDS (IDS) to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the IDS.
    • When using the IDS (laptop PC)
      1. Select "Self Test".
      2. Select "Modules".
      3. Select "PCM".
      4. Select "Retrieve CMDTCs".
  3. Verify the DTC according to the directions on the IDS screen.
  4. Press the clear button on the DTC screen to clear the DTC
  5. Verify that no DTCs are displayed.
    Fig 1: Identifying Data Link Connector - 2 Location
    G04969252Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals