Body Control Module (BCM) Inspection: Notes

Remove the front scuff plate inner (LH). (See FRONT SCUFF PLATE REMOVAL/INSTALLATION )
Remove the front side trim (LH). (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
Remove the dashboard under cover. (Driver side) (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION .)
Set the hood release lever out of the way. (See HOOD LATCH AND RELEASE LEVER REMOVAL/INSTALLATION .)
Remove the BCM with the connector connected.
Measure the voltage at each terminal is as indicated in the Terminal Voltage Tables. (See Terminal Voltage Table (Reference) )
- If the voltage is not as specified in the Terminal Voltage Table, inspect the parts under "Inspection item (s)".
  - If the system does not work properly even though the parts or related wiring harnesses do not have any malfunction, replace the BCM.