Instrument Cluster DTCS
INSTRUMENT CLUSTER DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Malfunction location | Freeze frame data | Reference |
|---|---|---|---|
| B1213 | Only one key ID number is registered. | - | (See SECURITY LIGHT 21, DTC B1213/P1260 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)] .) |
| B1342 | Instrument cluster malfunction | - | (See DTC B1342 [INSTRUMENT CLUSTER] .) |
| B1600 | The key ID number data cannot be read. | - | (See SECURITY LIGHT 13, DTC B1600/P1260 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)] .) |
| B1601 | The instrument cluster has detected unregistered key ID number. | - | (See SECURITY LIGHT 15, DTC B1601/P1260 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)] .) |
| B1602 | The instrument cluster cannot read key ID number data normally. | - | (See SECURITY LIGHT 14, DTC B1602/P1260 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)] .) |
| B1681 | No detected communication with the coil antenna | - | (See SECURITY LIGHT 11, DTC B1681/P1260 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)] .) |
| B2103 |
|
- | (See SECURITY LIGHT 12, DTC B2103/P1260 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)] .) |
| B2139 | ID number data in the PCM and the instrument cluster do not match. | - | (See SECURITY LIGHT 23, DTC B2139/P1260 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)] .) |
| B2141 | Communication error between the instrument cluster and the PCM (data transfer error) | - | (See SECURITY LIGHT 22, DTC B2141/P1260 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)] .) |
| B2143 | ID registration failure | - | (See DTC B2143 .) |
| B2431 | Key ID number registration error | - | (See SECURITY LIGHT 13, DTC B2431/P1260 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)] .) |
| B2477 | Configuration error | - | (See DTC B2477 [INSTRUMENT CLUSTER] .) |
| B2868 | Wheel unit No. 1 internal malfunction | - | (See DTC B2868, B2869, B2870, B2871 .) |
| B2869 | Wheel unit No. 2 internal malfunction | - | |
| B2870 | Wheel unit No. 3 internal malfunction | - | |
| B2871 | Wheel unit No. 4 internal malfunction | - | |
| U0073 | CAN system communication error | - | (See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM] .) |
| U0100 | Communication error to PCM | X | |
| U0101 | Communication error to TCM | X | |
| U0114 | Communication error to AWD control module | X | |
| U0121 | Communication error to DSC/RSC HU/CM | X | |
| U0127 | Communication failure between instrument cluster and keyless receiver | X | (See DTC U0127 .) |
| U0140 | Communication error to BCM | X | (See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM] .) |
| U0151 | Communication error to SAS control module | X | |
| U0200 | Communication error to BSM control module | - | |
| U0214 | Communication error to keyless control module | X | |
| U2023 | Correct data cannot be received from other module | X | (See DTC U2023 [INSTRUMENT CLUSTER] .) |
| U2064 | Warning light illumination request signal from other modules | X | (See DTC U2064 [INSTRUMENT CLUSTER] .) |
| U2197 | Erratic signal from PCM | - | (See DTC U2197 [INSTRUMENT CLUSTER] .) |
| U2510 | Communication error between the instrument cluster and the PCM (no response) | - | (See SECURITY LIGHT 16, DTC U2510/P1260 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)] .) |
| U2616 | Wheel unit No. 1 (No response) | X | (See DTC U2616, U2617, U2618, U2619 .) |
| U2617 | Wheel unit No. 2 (No response) | X | |
| U2618 | Wheel unit No. 3 (No response) | X | |
| U2619 | Wheel unit No. 4 (No response) | X |