DTC B1014: [Auto Light/Wiper Control Module]

DTC B1014 DETECTION CONDITION AND POSSIBLE CAUSE

DTC B1014	Rain sensor error
DETECTION CONDITION	Rain sensor internal malfunction
POSSIBLE CAUSE	Rain sensor malfunction Auto light/wiper control module malfunction

DTC B1014 DIAGNOSTIC PROCEDURE

STEP	INSPECTION		ACTION
1	PERFORM DTC INSPECTION Clear DTCs using the M-MDS. (Refer to CLEARING DTC [AUTO LIGHT/WIPER CONTROL MODULE] .) Perform the auto light/wiper control module DTC inspection using the M-MDS. (Refer to DTC INSPECTION [AUTO LIGHT/WIPER CONTROL MODULE] .) Is DTC B1014 displayed?	Yes	Replace the rain sensor, then go to the next step. (Refer to RAIN SENSOR REMOVAL/INSTALLATION .)
1		No	Go to the next step.
2	VERIFY DTC Clear DTCs using the M-MDS. (Refer to CLEARING DTC [AUTO LIGHT/WIPER CONTROL MODULE] .) Perform the auto light/wiper control module DTC inspection using the M-MDS. (Refer to DTC INSPECTION [AUTO LIGHT/WIPER CONTROL MODULE] .) Is DTC B1014 displayed?	Yes	Replace the auto light/wiper control module, then go to the next step. (Refer to AUTO LIGHT/WIPER CONTROL MODULE REMOVAL/INSTALLATION .)
2		No	Go to the next step.
3	VERIFY THAT NO OTHER DTCs ARE PRESENT Are there other DTCs output?	Yes	Perform the corresponding DTC inspection. (Refer to DTC TABLE [AUTO LIGHT/WIPER CONTROL MODULE] .)
3		No	DTC troubleshooting completed.