LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2011 >> RX-8 R3, 1.3 2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 557 (Dynamic Stability Control System) >> Rear Abs Wheel-Speed Sensor Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rear Abs Wheel-Speed Sensor Removal/Installation

WARNING: This page is about a different car, the 2010 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the trunk side trim. (See TRUNK SIDE TRIM REMOVAL/INSTALLATION .)
  2. Remove in the order indicated in the figure below.
  3. Install in the reverse order of removal.
Fig 1: Rear ABS Wheel-Speed Sensor Removal/Installation Replacement Components With Torque Specifications
G05985212Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals