Air Conditioning Compressor Module (ACCM)
DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| P0AFA:16 | Hybrid Battery System Voltage Low: Circuit Voltage Below Threshold | See PINPOINT TEST 28: DTC P0AFA:16 OR P0AFB:17 . |
| P0AFB:17 | Hybrid Battery System Voltage High: Circuit Voltage Above Threshold | See PINPOINT TEST 28: DTC P0AFA:16 OR P0AFB:17 . |
| B11EE:19 | A/C Compressor: Current Above Threshold | INSTALL a new electric A/C compressor. See AIR CONDITIONING (A/C) COMPRESSOR REMOVAL/INSTALLATION - HYBRID . TEST the system for normal operation. |
| B11EE:49 | A/C Compressor: Internal Electronic Failure | INSTALL a new electric A/C compressor. See AIR CONDITIONING (A/C) COMPRESSOR REMOVAL/INSTALLATION - HYBRID . TEST the system for normal operation. |
| B11EE:4B | A/C Compressor: Over Temperature | VERIFY the refrigerant charge level. See SPECIFICATIONS . If the charge level is low, RECHARGE the system, CLEAR the DTCs and REPEAT the self-test. TEST the system for normal operation. If the DTC returns, INSTALL a new electric A/C compressor. See AIR CONDITIONING (A/C) COMPRESSOR REMOVAL/INSTALLATION - HYBRID . TEST the system for normal operation. |
| U0100:00 | Lost Communication With ECM/PCM "A": No Sub Type Information | See PINPOINT TEST 1: THE PCM DOES NOT RESPOND TO THE SCAN TOOL OR NO HIGH SPEED CONTROLLER AREA NETWORK (HS-CAN) to diagnose lost communication with the ECM/PCM "A". |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Module: No Sub Type Information | See PINPOINT TEST 4: THE INSTRUMENT CLUSTER DOES NOT RESPOND TO THE SCAN TOOL to diagnose lost communication with the IC module. |
| U0401:68 | Invalid Data Received From ECM/PCM "A": Event Information | This DTC can set due to a fault in the PCM or because the PCM is unable to communicate over the Controller Area Network (CAN) bus. CARRY OUT a self-test of the PCM. If the scan tool indicates that the PCM is not responding, see PINPOINT TEST 1: THE PCM DOES NOT RESPOND TO THE SCAN TOOL OR NO HIGH SPEED CONTROLLER AREA NETWORK (HS-CAN) to diagnose the network communication concern. If PCM DTCs are present, see PCM DTC CHART - HYBRID . |
| U0423:68 | Invalid Data Received From Instrument Panel Cluster Control Module: Event Information | This DTC can set due to a fault in the Instrument Cluster (IC) or because the IC is unable to communicate over the CAN bus, CARRY OUT a self-test of the IC. If the scan tool indicates that the IC is not responding, see PINPOINT TEST 4: THE INSTRUMENT CLUSTER DOES NOT RESPOND TO THE SCAN TOOL to diagnose the network communication concern. If IC DTCs are present, see INSTRUMENT CLUSTER (IC) DTC CHART to diagnose the IC system fault. |
| U3000:49 | Control Module: Internal Electronic Failure | INSTALL a new electric A/C compressor. See AIR CONDITIONING (A/C) COMPRESSOR REMOVAL/INSTALLATION - HYBRID . TEST the system for normal operation. |