Air Bag Control Module: Testing and Inspection

SAS CONTROL MODULE CONFIGURATION

1. Connect the M-MDS (IDS) to the DLC-2.

2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

- When using the IDS (laptop PC)

- Select the "Module Programming".
- Select the "Programmable Module Installation".
- Select the "RCM".

3. Perform the configuration according to the directions on the screen.

4. Retrieve DTCs by the M-MDS, then verify that there is no DTC present.

- If a DTC (s) is detected, perform the applicable DTC inspection. Restraint System - DTC Table