Knock Sensor: Testing and Inspection

KNOCK SENSOR (KS) INSPECTION [SKYACTIV-G 2.0]

Resistance Inspection

1. Remove the battery cover. Removal and Replacement

2. Disconnect the negative battery cable. Removal and Replacement

3. Remove the plug hole plate. Plug Hole Plate Removal/Installation

4. Remove the intake manifold. Service and Repair

5. Disconnect the KS connector.

6. Remove the KS. Service and Repair

7. Measure the resistance between KS terminals A and B.






- If not as specified, replace the KS. Service and Repair

Specification
- 504-616 kilohms [10-30 °C {50-86 °F}]