No.3 Push Button Start System Does Not Operate [Advanced Keyless Entry And Push Button Start System]: Notes

3	Push button start system does not operate
DESCRIPTION	Cannot switch to ACC or IG ON Engine does not start
Possible Causes	Transmitter (electronic key) battery malfunction (battery power depleted) Transmitter (electronic key) malfunction Keyless control module malfunction Open or short circuit in keyless control module power supply EGI fuse, STEERING LOCK fuse or ROOM fuse malfunction Front keyless antenna malfunction Open or short circuit in wiring harness between front keyless antenna and keyless control module Open or short circuit in wiring harness between push button start switch and keyless control module PCM malfunction Engine starting system malfunction Short to power supply in starter relay wiring harness Steering lock unit malfunction Open or short circuit in wiring harness between keyless control module and steering lock unit Relay block (ACC relay, IG1 relay, IG2 relay) malfunction Open or short circuit in wiring harness between relay block (ACC relay, IG1 relay, IG2 relay) and keyless control module CAN system malfunction Effect of after-market electronic device installation

NOTE:

Even if the advanced key is inside the vehicle, the advanced start function may not operate if the advanced key is in a poor signal reception location such as the door pocket.