Door Glass Position Change

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

After performing the following procedure, verify that the two-step down function operates normally and the door glass position has changed. If the two-step down function does not operate or the door glass position has not changed, the procedure was not performed properly. Repeat the procedure from the beginning.

Fig 1: Door Glass Position Change Procedure Flow Chart

Courtesy of MAZDA MOTORS CORP.

Mazda Modular Diagnostic System (M-MDS) display	Function	Initial Setting	Setting Content	Control Unit
-	Two-step down function can be set to inoperable.	Enabled	Disabled/Enabled	Power window main switch