Auto light system/auto light-off system
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the PERSONALIZATION FEATURES SETTING PROCEDURE
- Connect the M-MDS to the DLC-2.
- After the vehicle is identified, select the following items from the initial screen of the M-MDS.
- Select the "Module Programming"
- Then, select items from the screen menu in the following order
- Select "Programmable Parameters"
- Select "Exterior Lighting"
- Select the item name, and then select option
CONTROL UNIT REFERENCE
| M-MDS display | Function | Initial setting | Setting content | Control unit |
|---|---|---|---|---|
| Autolamp On Setting | The auto light system sensitivity can be adjusted | Standard (Other) | Standard (Other)/Low (Other) | Auto light/wiper control module |
| Headlamp auto-on timer | The elapsed time between the detection of darkness and the headlights turning on can be adjusted | 15s | 0s, 5s, 10s, 15s, 20s | Auto light/wiper control module |
| Headlamp auto-off timer | The elapsed time between the ignition being switched off and the headlights turning off can be adjusted | 30s | 0s, 30s, 60s, 120s | Auto light/wiper control module |