Advanced Key Id Code Registration [Advanced Keyless Entry And Push Button Start System]

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

For a key that can start the engine, or no advanced key, the M-MDS can be used to force the ignition to switch is IG ON. (See FORCED IGNITION ON [WITH ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM] .)

Fully lower the driver-side door glass.
Connect the M-MDS to the DLC-2.

Fig 1: Identifying DLC-2 Connector

Courtesy of MAZDA MOTORS CORP.

Set the M-MDS outside the vehicle with its cable passing through the door glass opening.
CAUTION:
- Cover the vehicle body with a clean rag so as not to damage the vehicle body with the cable.
After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
- Using an IDS (laptop PC)
  1. Select the "Body"
  2. Select the "Security"
  3. Select the "PATS Functions"
- Using a PDS (Pocket PC):
  1. Select the "All Tests and Calibrations"
  2. Select the "PATS Functions"
Select the following from the screen menu.
1. Select the "Program Additional Advanced Key"
Perform the security access according to the directions on the M-MDS screen.