April 5, 2026: LEMON Manuals is launched! Read the announcement.

M-MDS Connecting Procedure

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Do not place the M-MDS in the vehicle while programming the immobilizer system.

Fully lower the door glass.
Connect the M-MDS to the DLC-2

Fig 1: Identifying DLC-2 Connector

G06200946

Courtesy of MAZDA MOTORS CORP.

Place the M-MDS outside the vehicle.

CAUTION:

Cover the vehicle body with a clean rag so as not to damage the vehicle body with the cable.